iOS 10.3.3 H3lix JAILBREAK RC3 (32-Bit Only)

iPhone 5/5C (32-Bit) with H3lix Jailbreak

 

The 32-Bit #h3lix #Jailbreak for iOS 10.3.3, iOS 10.3.2 and iOS 10.3.1 has been updated to RC3 which adds support for iOS 10.2 32-Bit, and it is now only running the exploit if the system has been up for at least 80 seconds which helps to improve the stability.

 Jailbreak iOS 10.3.3 and lower on any 32-Bit Apple device (iPhone 5 / iPhone 5C, iPad 4). H3lix Jailbreak RC3 has been released by tihmstar and s1guza and it is now available in IPA format for you to get. I have tested the jailbreak on iOS 10.3.3 iPhone 5 and it works very well, for the first time, no reboots and not errors during the jailbreak process. The jailbreak is based on v0rtex exploit released by s1guza, that has been ported from 64-Bit, and the vulnerability exists on 64-Bit as well, therefore the same exact exploit could be used for a 10.3.3 Jailbreak on 64-Bit (iPhone 5S or newer) in the future. For the moment, H3lix #Jailbreak doesn't work on 64-Bit, so do not try it on anything newer than iPhone 5C. 

 #Cydia seems to be working fine, everything installed works well aside from Anemone. Anemone is currently broken on this jailbreak and will result in Springboard going into Safe Mode until you remove it. An advantage of this jailbreak is that, since iOS 10.3.3 is the last version for all 32-Bit devices that supported iOS 10.x, this is pretty much a jailbreak for life for these devices, just like on iPhone 4 and 4S. This means that, if you happen to screw up, you just restore the forever signed iOS 10.3.3 and you can re-jailbreak.

In order to install h3lix jailbreak, follow this procedure:

• 1) Download the IPA from tihmstar's website referenced below.
• 2) Obtain Cydia Impactor from the website referenced below.
• 3) Connect your iPhone to the computer and make sure it is unlocked and the computer is trusted.
• 4) Drag and drop the IPA file in Cydia Impactor.
• 5) Sign in with your Apple ID and wait.
• 6) An error will pop at the end, just press ok. 
• 7) Profit. H3lix Jailbreak should be installed on your home screen.

Video Tutorial:

Resources:

h3lix Jailbreak: https://h3lix.tihmstar.net

Cydia Impactor: http://www.cydiaimpactor.com

 

How to DualBoot Any iPhone (32-Bit) iOS 9.3.5 With iOS 6.0, iOS 6.x and iOS 7.x

 Note: Only for 32 bit Device

Having two separate iOS versions on your iPhone, iPad or iPad running iOS 9.3.5 is no longer impossible. Thanks to CoolBooter, you can dualboot your device in just a couple of minutes, and it is as simple as installing an application from Cydia to prepare all the things necessary for the installation for you. 

Now that #iOS 9.3.5 is Jailbroken with #Phoenix #Jailbreak, your 32-Bit devices can get a second life running your favorite version of iOS, no matter if that is iOS 6.x or iOS 7.x Coolbooter works by installing in a completely separate partition the secondary iOS version, and therefore you can have both iOS 9.3.5 Jailbroken and iOS 6 or iOS 7 Jailbroken, or stock. You can also enable Verbose boot for the secondary version. 

Switching between versions is as as simple as opening #CoolBooter and pressing "Boot". A little side-note, if you're using a stasher, you will have to remove the stasher, otherwise, CoolBooter will complain that it is not running as root. Installing 1 iOS versions on your iPhone can be fun, but you should be careful while using CoolBooter! Always keep backups of data just in case. CoolBooter only works on 32-Bit devices. Currently, there is no support for 64-Bit devices, so no iPhone 5S or newer.

Related Search Terms:Jailbreak, iPhone,ios,Jailbreak iPhone , iPhone 32 bit devices,Phoenix,Phoenix Jailbreak,Coolbooter,Tutorial,Jailbreak tutorial,Pangu, Pangu Jailbreak,Dualboot,Cydia,iPhone64Bit,firmware,fce365,thelocalstreetband,softandwarez

Resources:
CoolBooter: https://coolbooter.com
Jailbreak Phoenix (32-bit): https://softandwarez.blogspot.in/2017/10/phnix-jailbreak-for-ios-935-32-bits.html

Credit: https://fce365.info

Universal Samsung FRP Bypass

 

Universal Samsung FRP Bypass

Here are the steps to remove factory reset protection / Google previously synced account lock from your Samsung device.

1. Download and install RealTerm program
2. Download and copy com.rootjunky.frpbypass-1.0.apk to the device micro sdcard or download once into the device
3. start phone and connect to WIFI also plug into the computer with your usb cable
4. start RealTerm on your pc and under pisplay check the box HALF DUPLEX
5. right click on my computer and select manage once it opens click device manager then modems
6. under modems you should see a Samsung device. right click it then select properties
7. once the properties window opens select modem tab and see what port it is on like com5 for an example
8. now that you know the com port number close all device manager windows and open RealTerm again
9. under the ports tab in RealTerm enter your port number then click change.
10. next click the send tab. you will need to send these two commands with the Send ASCII button
11. first at+creg?\r\n
12. then atd1234;\r\n
13. look at your phone and the dailer will pop up.
14. Know watch the video below to see the rest of the steps and please comment below on your success or failures. thanks

NOTE: If you dont have a SDcard and are getting the sparse ERROR in es file explorer then you can buy a OTG flash drive like this one and load the FRPbypass.apk to it from your computer then plug it into the phone. once plugged in navigate to it in es file explorer and install the frp bypass app that way. You can also put this address into your ES file Explorer app https://www.androidfilehost.com/?fid=24665542585483676

Universal Samsung Galaxy s6 s7 note 5 note 7 FRP bypass for all Samsung devices(2016)

 

New FRP Bypass for August and September Security Patch HTC 10 (2016)

 ll